Skip to content
Kit

Renter no-drill smart home kit

Updated

Bulbs, plugs, adhesive sensors and a controller: a removable smart home you can set up in an afternoon, with optional upgrades that need your landlord’s written okay.

As an Amazon Associate we earn from qualifying purchases. Links to Amazon on this page are affiliate links: buying through them costs you nothing extra.

Estimated budget$112–$385
Core items4 items
DifficultyEasy
Time1–2 hours

Before you buy

What makes a device renter-friendly

Anything outside that list is an alteration under most leases. Read Can renters install smart devices? before you add a thermostat, switch, lock or doorbell.

Where each device goes

DeviceGood spotWatch out for
BulbsTable and floor lamps, ceiling fixtures you own the shade forEnclosed fixtures can overheat some bulbs; read the bulb’s limits. Keep the wall switch on, or the bulb loses power.
PlugsLamps, fans, TV and console power stripsStay within the plug’s rating. Do not use on heaters, cooking appliances or power tools unless the plug is made for them.
Door sensorInside the door frame, on the door sideTest the adhesive on a hidden spot. Clean the surface first.
ControllerCentral room, off the floor, away from metalIf your Wi-Fi is the building’s, check for device limits or isolation first.
Leak sensorsFlat on the floor under sinks and by the washerKeep the contacts clean; batteries need replacing.

Stick-on strips: be careful on paint

Adhesive strips can pull paint off drywall if you remove them the wrong way. Use only strips rated for the weight, press them for the time on the package and follow the maker’s removal steps. On textured or freshly painted walls, test a hidden spot first, and keep a small supply of touch-up paint if your lease allows it.

Network and security

Use a strong, unique password on your Wi-Fi and on each device account, turn on two-factor authentication and keep firmware updated, as the Federal Trade Commission advises. If you share the router with roommates, create a guest network for devices if the router supports it. Matter devices and Thread sensors are covered in Matter vs Zigbee.

Core items

Smart bulbs (white, E26) × 4

$8–$20

The easiest upgrade in a rental: screw in, name the room, and set schedules and dimming from the app or by voice. Four covers a living room and a bedroom.

What to look for: E26 base, dimmable, Matter or your voice assistant’s protocol, a warm-to-neutral white range, works with the lamp’s shade and any enclosed fixture

See options on Amazon

Smart plugs × 3

$10–$25

Make lamps, fans and small appliances controllable without touching the wiring. They also let you cut standby power on a TV or console.

What to look for: 15 A rating, UL listed, a physical button, Matter support, no oversized body that blocks the second outlet

See options on Amazon

Adhesive door and window sensors × 2

$10–$40

Tell you when the front door opens or a window is left open. They mount with adhesive strips and come off at move-out.

What to look for: removable adhesive or magnet mount, replaceable coin-cell battery, a protocol your controller supports, a battery-low alert

See options on Amazon

Controller: smart speaker, display or hub

$30–$150

Runs voice control and automations. Plugs into an outlet and needs no wall mounting.

What to look for: Matter controller support, a Thread border router if you want Thread sensors, a microphone mute switch, local automations

See options on Amazon

Nice to have

Retrofit smart lock

$100–$280

Replaces only the inside thumbturn, so the landlord’s key still works. Ask in writing first.

What to look for: retrofit design that keeps the outside cylinder, a physical key backup, supports your door’s thickness, easy to put back to stock

See options on Amazon

Battery video doorbell with a removable mount

$50–$230

Many battery models can hang on an over-the-door bracket or an adhesive mount instead of screws. Ask first, because some leases and buildings restrict doorbells.

What to look for: no-drill mount option, a rechargeable battery you can swap, local storage or a plan you accept, a chime that plugs into an outlet

See options on Amazon

Water leak sensors × 2

$10–$40

Put one under the kitchen sink and one by the water heater or washer. They need no permission and can limit damage that would cost you your deposit.

What to look for: built-in siren, replaceable battery, a low-battery alert, a protocol that matches your controller

See options on Amazon

Removable adhesive hooks and cable clips

$5–$15

Keep cords and small devices off the wall and the baseboard without nails.

What to look for: the weight rating on the package, clear removal instructions, residue-free removal on painted drywall

See options on Amazon

Step by step

  1. Read your lease for clauses on alterations, locks and devices, and decide which optional items you will ask about.
  2. Set up the controller first, then connect it to the Wi-Fi you control.
  3. Add bulbs and plugs one at a time. Name each by room and lamp (“Living room lamp”).
  4. Stick the door sensors in place and test them: open and close the door and confirm the alert on your phone.
  5. Build two simple routines: lights on at sunset, and lights off at bedtime.
  6. Put the packaging and the original parts for anything you replace in a labeled box, so move-out takes minutes.

Cheaper or upgraded versions

Budget version, about $50–$100: two or three smart plugs and two bulbs on your phone’s app, with no controller. Control is slower and remote access depends on each brand’s cloud.

Upgrade, about $350–$800: add a retrofit lock, a battery video doorbell on a no-drill mount and two leak sensors, each with your landlord’s written okay. For a camera or doorbell, check building rules before you buy.

Frequently asked questions

What smart home devices can renters use without drilling?

Smart bulbs, smart plugs, smart speakers, adhesive door and window sensors, leak sensors and many battery video doorbells with over-the-door or adhesive mounts. Check your lease for rules about each.

Do I need Wi-Fi that I control?

Not always, but it helps. Building-managed Wi-Fi may block device-to-device communication or limit connections, which can stop devices from pairing. Using your own router avoids it.

Will adhesive strips damage the paint?

They can, especially on fresh or thin paint. Follow the maker’s removal steps and test a hidden spot first. Ask your landlord if small repairs are your job at move-out.

Can I take everything with me when I move?

Yes. Everything in the base kit is yours and comes off without tools. Remove each device from your account and reset it before you leave.

Sources

  1. Federal Trade Commission — Securing your internet-connected devices at home
  2. Connectivity Standards Alliance — Matter
  3. U.S. Department of Energy, Energy Saver — LED lighting

Related pages